BESEGEMShop on Amazon

Magnetic Anti-Jump Mesh Cover

Feed through the lid. Keep every fish in.

This magnetic aquarium lid combines a soft, see-through aquarium mesh cover with an easy-access feeding window. The fish tank lid helps keep jumpers in while letting air flow through—without hiding your aquarium.

Fish flakes dropped through the open feeding window of a magnetic mesh aquarium lid, with tetras belowFeeding window open

Nobody wants to find their fish on the floor.

Jumping is one of the most common ways fish are lost from open-top tanks. Hard glass or plastic lids block light, fog up, and fish that hit them can hurt their heads. So a lot of people leave the tank uncovered.

A soft mesh cover keeps the tank open and stops the jump.

  • BettasLeap at the surface when startled or chasing food.
  • Tetras & rasborasCan bolt out together after a water change.
  • Gobies & killifishNatural jumpers, especially at night.
  • HatchetfishBuilt to launch out of the water.
  • Plecos & eelsClimb the glass and slip over the rim.
  • ShrimpOften crawl out when newly added to a tank.

Two versions. One feeds easier.

Choose an aquarium cover with a built-in feeding window or a classic fish tank cover with one continuous sheet of mesh. Both magnetic fish tank lid options use the same mesh and secure-fit kit.

Mesh aquarium lid with its feeding window openRecommended

With Feeding Window

Open the window, drop in food or dose fertilizer, then close it. The lid stays on and the fish stay in.

  • Built-in feeding window
  • Soft anti-jump nylon mesh
  • Strong magnetic strips
  • Cut-to-fit, up to 40 gal
  • 4 corner buckles
Buy with Feeding Window on Amazon
Aquarium fully covered by a seamless magnetic mesh lid without a feeding window

Classic, no window

One continuous sheet of mesh. A good fit for very small fish or shrimp, or if you prefer to lift a corner to feed.

  • No feeding window
  • Soft anti-jump nylon mesh
  • Strong magnetic strips
  • Cut-to-fit, up to 40 gal
  • 4 corner buckles
Buy Classic on Amazon

Soft where it matters, strong where it holds.

Every BESEGEM aquarium mesh cover pairs a soft, breathable barrier with a magnetic frame—an aquarium lid designed to help protect your fish without getting in the way.

Full view of a planted aquarium with fish and a discreet mesh cover
Magnetic strip + grooved strip lock the mesh in place
  • Soft on impact

    If a fish jumps, it hits soft mesh, not a hard lid. That means no painful "clunk" and no head injuries.

  • Strong magnetic hold

    The adhesive and grooved magnetic strips snap together and stay put. Lift off for maintenance and snap back on.

  • Cut to any shape

    Trim the mesh and strips to fit. Works on regular, bow-front, curved and diamond-shaped tanks.

  • Clear viewing

    The mesh is very see-through, so your fish, plants and lighting are not hidden.

  • Fresh air flow

    Fine mesh stops escapes but still lets air in and out. No fogged glass, no stuffy tank.

  • All-in-one kit

    Mesh, magnetic strips, plastic strip and corner buckles are all in the box. Easy for beginners.

A hand lifting the corner of a magnetic mesh aquarium cover

Install it once. Lift it anytime.

This magnetic fish tank cover installs without drilling. Use scissors to trim the aquarium lid to your tank shape while filtration keeps running.

  1. Stick the magnetic strip

    Clean and dry the tank rim, then attach the adhesive magnetic strip along the top edge.

  2. Snap on the grooved strip

    Place the grooved magnetic strip on top. It locks onto the adhesive strip by itself.

  3. Lay and lock the mesh

    Cover the tank with the mesh and press the plastic strip into the groove to hold it tight.

  4. Add corners and trim

    Fit the 4 corner buckles, then trim off any extra mesh for a clean edge.

Tank sizes

A fit for your tank—and room to grow.

Choose a size range based on your tank. The mesh is designed to be cut to fit your aquarium shape. Measure the outside perimeter before ordering.

  • 10–20 galAvailable
  • 40–75 galAvailable
  • 75–120 galComing soon
  • 120–220 galComing soon
Explore sizes on Amazon
Material
Nylon mesh
Color
Black
Versions
With or without feeding window
Warranty
1 year

What's in the box

  • ×1
    Soft nylon meshCut-to-fit for your aquarium
  • ×1
    Magnetic strip setAdhesive and grooved strips
  • ×1
    Plastic locking stripHolds mesh in the groove
  • ×4
    Corner bucklesFor clean, tight corners

The Feeding Window version comes with the same kit, plus a built-in opening for easy feeding.

Questions

Which version should I choose?

For most people, the Feeding Window version. You can feed, dose and drop in tablets without removing the lid. That matters most when you feed every day. Choose the classic version if you keep very tiny fish or shrimp, or want one continuous sheet.

How do I choose the right fish tank lid size?

Choose the aquarium cover size range that fits your tank, then follow the product listing instructions to measure and trim the mesh. Available ranges include 10–20 gallon and 40–75 gallon; larger sizes are planned.

Does it work on bow-front or curved tanks?

Yes. The magnetic strips bend to follow curved and bow-front edges, and you can cut the mesh to any shape, including diamond-shaped tanks.

Will the mesh hurt my fish if they jump?

No. The mesh is soft, so a jumping fish meets a gentle barrier instead of a hard lid. This helps prevent head and fin injuries.

Can I still reach into the tank for maintenance?

Yes. The mesh frame lifts off the magnetic strip and snaps back into place when you are done.

Is there a warranty?

Every BESEGEM anti-jump cover comes with a 1-year warranty. Contact us through Amazon if you have any issue.